Product name: 12V 60A 24V 45A 36V 30A 48V 25A 60V 20A 72V 16A lead acid battery charger -- 1500W series

Specifications:

   Input Voltage: 100-240Vac input AC voltage

   Input Frequency: 50Hz or 60Hz and single phase.

   Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ

   Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)

   Constant Charging Voltage: 29.4V( Lead acid battery)

  Charging Mode: 3 Stages, CC, CV, Trickle 

Safety Test for battery charger

1. Hi-pot Test:15KVac 5mA 3 Seconds between input and output test

2. Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds

3. Drop test: height, The wheelchair battery charger conform to BS EN60068-2-32:1993 TEST ED: free fall appendix B

Protection for battery charger

1. Over Voltage Protection   The power supply will be auto recovered when faults remove

2. Over Current Protection   Charger output current does not exceed the set maximum battery charging current.

3. Short Circuit Protection  Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)

Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.

DC Connector Dimension:

Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc.

Special plug: 4-pin XLR, 2-port Inline, 3-pin House, Polarized, 3-port House for Panterra and Grio, Polarized C7 etc